Spring | Damper | Shock

The washer suspension kit supports the washer tub and keeps it stable during unbalanced loads. It is recommended if you are replacing one, you should replace all the rods in your washing machine. This is an exact replacement for the Whirlpool part...

The damper assembly is designed to restrict the amount of movement allowed by the washer's drum. The assembly may need to be replaced if there is an unbalanced error code coming up or excessive noise while the washer is operating. This is an exact...

The shock absorber prevents the washer from excessively vibrating by absorbing the movements of the washer tub. All front load washer have at least two shock absorbers and if you need to replace one, it is best to replace them all. This will ensure...

The shock absorber prevents the washer from excessively vibrating by absorbing the movements of the washer tub. All front load washers have at least two shock absorbers and if you need to replace one, it is best to replace them all. This will ensure...

The shock absorber prevents the washer from the excessively vibrating by absorbing the movements of the washer tub. All front load washers have at least two shock absorbers and if you need to replace one, it is best to replace them all. This ensures...

The shock absorber prevents the washer from excessively vibrating by absorbing the movements of the washer tub. All washer's have at least two shock absorbers and if you need to replace one, it is best to replace them all. This will ensure proper...

Washing machine tub counterbalance spring. This spring offsets the weight of the motor on the front of the washer. If broken, the tub will lean forward and the tub will be off balance during the spin cycle.  Suspension counter spring 6.5" long Fits...

Washer tub suspension rod kit. Suspension rod supports included. The suspension rods help to dampen the movement of the washer tub. If one or more of the suspension rods are broken, the washer will vibrate or shake. Contain 4 rods, 4 washers, 4...

A four-piece suspension rod kit that can replace Whirlpool® models and others. These help support the drum, to prevent vibration. Total Length 23-1/2 inches Length of springs 4 inches Includes Suspension ball housings, damper rods, and suspension...

Compatible Models This Part Fits The Following Model Numbers: *Type your model number in the search bar below. If your model appears this part is compatible. Click here to see where to find the model number. PAV2300AGW - Whirlpool |...

This suspension rod and spring assembly acts as a shock absorber that allows the washer tub to move while helping minimize vibration in the spin mode. 26" Suspension spring/rod assembly Dimensions:26" x 1.25" x 1.25"